What is a 285/40R24 tire width?
The 285/40R24 has a width of 11.2 inches or 285 mm wide. This is the measurement of the tire at its thickest point, the distance between the inner sidewall’s widest point and the outer sidewall’s widest point. This physical width of the tire can change if the tire is mounted on a wheel slightly wider or narrower than the size indicated by the rim width.
How tall is a 285/40R24 tire’s height?
The 285/40R24 has an overall diameter of 33 inches or 838 mm tall (measured from the outside edges of the wheel)
What size rim do I need for 285/40R24?
The size rim of a 285/40R24 tire is 24 inches or 610 mm tall. This number represents the distance between the two bead seat areas where the tire is sealed onto the wheel.
How tall is a 285/40R24 tire sidewall’s height?
The sidewall height of a 285/40R24 is 4.5 inches or 114 mm tall. It’s measured from the rim to the outer edge of the tire.
What about 285/40R24 tire circumference?
285/40R24 tire has a circumference of 103.7 inches or 2634 mm
How many revolutions for 285/40R24 per mile & kilometer?
The 285/40R24 performs 380 revolutions per kilometer or 612 revolutions per mile. Revolutions per mile indicate the number of times a tire revolves while it covers the distance of one mile/kilometer
What’s wider or narrow than 285/40R24 is acceptable?
You can replace the 285/40R24 tires that are within ±3% of the overall tire diameter. In this case, it’s between 32 and 34 inches (813mm to 863 mm). Check our tire size chart here or the tire size calculator tool here to find your size.
