355/40R26 In Inches

What size tire is 355/40R26 in Inches?

The 355/40R26 equivalent to 37.2x14R26 in inches, as follow:

  • 37.2 inches (944mm) stand for the tire diameter, also referred to as the tire height
  • 14 inches (355mm) is the tire width, this may also know as the section width
  • 26 inches (660mm) represent the rim diameter or called the wheel diameter that can be mounted on.
Diameter37.2"944 mm
Tread Width14"355 mm
Rim Diameter26"660 mm
Sidewall Height5.6"142 mm
Circumference116.9"2969 mm
Revolutions542"337 mm
tire diameter
Tire Side
Tire Circumference
542 Revs/Mile

Tire Size Chart for 26" Wheels:

31″ Tire Diameter

32″ Tire Diameter

33″ Tire Diameter

34″ Tire Diameter

35″ Tire Diameter

37″ Tire Diameter

What is a 355/40R26 tire width?

The 355/40R26 has a width of 14 inches or 355 mm wide. This is the measurement of the tire at its thickest point, the distance between the inner sidewall’s widest point and the outer sidewall’s widest point. This physical width of the tire can change if the tire is mounted on a wheel slightly wider or narrower than the size indicated by the rim width.

How big is a 355/40R26 tire’s height?

The overall diameter of a 355/40R26 is 37.2 inches or 944 mm tall (measurement of a tire’s outside diameter through its exact center when inflated with no load.

What size rim do I need for 355/40R26?

The size rim of a 355/40R26 tire is 26 inches or 660 mm tall. This number represents the distance between the two bead seat areas where the tire is sealed onto the wheel.

How tall is a 355/40R26 tire sidewall’s height?

The sidewall height of a 355/40R26 is 4.6 inches or 142 mm tall. It’s measured from the wheel rim to the top of the tread, expressed as a percentage of tire width.

What about 355/40R26 tire circumference?

355/40R26 tire has a circumference of 116.9 inches or 2969 mm

How many revolutions for 355/40R26 per mile & kilometer?

The 355/40R26 performs 337 revolutions per kilometer or 542 revolutions per mile. Revolutions per mile indicate the number of times a tire revolves while it covers the distance of one mile/kilometer

What’s wider or narrow than 355/40R26 is acceptable?

You can replace the 355/40R26 tires that are within ±3% of the overall tire diameter. In this case, it’s between 36.1 and 38.3 inches (916mm to 972 mm). Check our tire size chart here or the tire size calculator tool here to find your size.

Share on:

Leave a Comment