What is 285/55R20 tire diameter?
The 285/55R20 has an overall diameter of 32.4 inches or 822 mm tall (Measurement of a tire’s outside diameter through its exact center when inflated with no load.)
How wide is a 285/55R20 tire’s width?
The 285/55R20 has a width of 11.2 inches or 285 mm wide. This is the measurement of the tire at its thickest point, the distance between the outer sidewall’s widest point and the inner sidewall’s widest point. This physical width of the tire can change if the tire is mounted on a wheel slightly wider or narrower than the size indicated by the rim width.
What is a 285/55R20 tire sidewall height?
The 285/55R20 has a sidewall height of 6.2 inches or 157 mm tall. It’s measured from the wheel rim to the top of the tread, expressed as a percentage of tire width.
What size rim do you need for 285/55R20?
The 285/55R20 tire has a size rim of 20 inches or 508 mm. This number represents the distance between the two bead seat areas where the tire is sealed onto the wheel.
How many revolutions for 285/55R20 per mile or kilometer?
The 285/55R20 performs 623 revolutions per mile or 387 revolutions per kilometer. Revolutions per mile indicate the number of times a tire revolves while it covers the distance of one mile/kilometer
How about 285/55R20 tire circumference?
The circumference of 285/55R20 is 101.8 inches or 2586 mm.
What’s wider or narrow than 285/55R20 is acceptable?
You can replace the 285/55R20 tires that are within ±3% of the overall tire diameter. In this case, it’s between 31.4 and 33.4 inches (797mm to 847 mm). Check our tire size chart here or the tire size calculator tool here to find your size.