What is a 295/35R20 tire width?
The 295/35R20 has a width of 11.6 inches or 295 mm wide. This is the measurement of the tire at its thickest point, the distance between the inner sidewall’s widest point and the outer sidewall’s widest point. This physical width of the tire can change if the tire is mounted on a wheel slightly wider or narrower than the size indicated by the rim width.
How big is a 295/35R20 tire’s height?
The overall diameter of a 295/35R20 is 28.1 inches or 714 mm tall (measurement of a tire’s outside diameter through its exact center when inflated with no load.
What size rim do I need for 295/35R20?
The size rim of a 295/35R20 tire is 20 inches or 508 mm tall. This number represents the distance between the two bead seat areas where the tire is sealed onto the wheel.
How tall is a 295/35R20 tire sidewall’s height?
The sidewall height of a 295/35R20 is 4.1 inches or 103 mm tall. It’s measured from the rim to the outer edge of the tire.
What about 295/35R20 tire circumference?
295/35R20 tire has a circumference of 88.3 inches or 2243 mm
How many revolutions for 295/35R20 per mile & kilometer?
The 295/35R20 performs 446 revolutions per kilometer or 718 revolutions per mile. Revolutions per mile indicate the number of times a tire revolves while it covers the distance of one mile/kilometer
What’s wider or narrow than 295/35R20 is acceptable?
You can replace the 295/35R20 tires that are within ±3% of the overall tire diameter. In this case, it’s between 27.3 and 28.9 inches (693mm to 735 mm). Check our tire size chart here or the tire size calculator tool here to find your size.