How big is a 285/65R20 tire’s height?
The overall diameter of a 285/65R20 is 34.6 inches or 878 mm tall (measurement of a tire’s outside diameter through its exact center when inflated with no load.
How wide is a 285/65R20 tire’s width?
The 285/65R20 has a width of 11.2 inches or 285 mm wide. This is the measurement of the tire at its thickest point, the distance between the outer sidewall’s widest point and the inner sidewall’s widest point. This physical width of the tire can change if the tire is mounted on a wheel slightly wider or narrower than the size indicated by the rim width.
What is a 285/65R20 tire sidewall height?
The 285/65R20 has a sidewall height of 7.3 inches or 185 mm tall. It’s measured from the rim to the outer edge of the tire.
What size rim do you need for 285/65R20?
The 285/65R20 tire has a size rim of 20 inches or 508 mm. This number represents the distance between the two bead seat areas where the tire is sealed onto the wheel.
How many revolutions for 285/65R20 per mile or kilometer?
The 285/65R20 performs 583 revolutions per mile or 362 revolutions per kilometer. Revolutions per mile indicate the number of times a tire revolves while it covers the distance of one mile/kilometer
How about 285/65R20 tire circumference?
The circumference of 285/65R20 is 108.7 inches or 2761 mm.
What’s wider or narrow than 285/65R20 is acceptable?
You can replace the 285/65R20 tires that are within ±3% of the overall tire diameter. In this case, it’s between 33.6 and 35.6 inches (852mm to 904 mm). Check our tire size chart here or the tire size calculator tool here to find your size.